|"Moreira, Eric" wrote:|
> Thanks. I was told by Ronnie on this list that I could pop in a Series 4 or
> 5 and it would work fine but I don't have one. The colors are the problem
> so if you or someone could tell me if this setup makes sense?:
> Trigger and input B (Not too sure about the B part) on one side and Home and
> Input A on the other side.
> Thanks guys!
Look inside the CAS. The pickup that reads from the 24 teethth (bottom
trigger) is the Main/Input B. The top pickup with 2-teeth is the Home/Input
A. Same as for a Series4/5 13BT. The colours may differ but should be
generally similar. The Main trigger is usually the firewall side and the Home
is the front side.
The HITman - Haltech Injection Tuning